Attention of using rock wool sandwich panel

Rockwool sandwich panels are becoming more and more popular due to their good thermal insulation and fire resistance properties. Rockwool sandwich panels are widely used in commercial and industrial buildings, what do we need to pay attention to in the process of using it? Solideck will give you the in-depth introduction.

Precautions for storage of Rockwool sandwich panels

When the temperature exceeds a certain temperature, for example: 200C, the insulation must be added to the appropriate outer protection, so that the rock wool sandwich panel thickness and weight changes.

rock wool board finished products in the case of outdoor insulation vulnerable to mechanical wear and tear should be appropriate to use metal or plastic wrapping, and then pay attention to the joints of the place, the sealing of the joints, when necessary, plus gum seal, parcel layer stacked local not less than 100 mm.

Precautions on construction of rock wool sandwich panel

• Pay attention to the rain, not in the rainy day construction.

• Used to keep cold must be in the addition of moisture-proof layer, in theterature is particularly low, with the resin-free rock wool insulation, its moisture-proof layer must also be fireproof.

• When the temPay attention to the rain, not in the rainy day construction.

• Used to keep cold must be in the addition of moisture-proof layer, in the tempperature exceeds a certain temperature, for example: 200 C^。, the insulation must be added to the appropriate outer protection, so that the rock wool sandwich panel thickness and weight changes.

• When the insulation object is placed at 90 degrees, and there is a certain height, rock wool board insulation layer must have positioning pins or support ring, the spacing must not be greater than 3 meters, in order to prevent the insulation material in the vibration downward sliding.

• In order to achieve the goal of minimizing heat loss, rock wool board and felt joints must be butt tight, if there is multi-layer insulation when the cross joints need to be intertwined, so as not to constitute a thermal bridge, in the cold must be eliminated when the cold bridge

Rock wool sandwich panel other considerations

• About the large diameter and flat wall equipment with rock wool finished insulation, beyond 200C^。, must bear in mind the rock wool board manufacturer’s advice: add insulation nails, (spacing 400 mm or so) the outer protection should be tight。
• Need to insulate the equipment, insulation nails and pipeline for the dry anti-corrosion, can accept the appropriate coating. In addition there should not be any leakage. This can achieve better results
• .

Rock wool sandwich panel both storage and construction process must pay attention to ensure that its thermal insulation and fire-resistant performance, in order to play its performance in the building.